Ever heard of orbs?

[angels4u]

In another forum they were talking about"Orbs" being seen on pictures,did you ever heard of this?

It seems to be demonic but I wonder if it exist at all.

Thanks,Angels

[refugepsa91]

Angels

orbs are supposed to be the ghosts of the dead....I have heard them described as balls of light (any color) or these streaks of light ... and yes usually people take pics in a allegedly haunted house or cemetary to see what shows up.

Its a wierd concept...but usually you can type in hauntings in your search bar and there is a good chance you will find a sight that has online pics of these so called "orbs".

I think it is a dangerous thing to get into to...believe me!...a couple of my friends and I went to a supposed haunted house and I can tell you we all went through the worst week imaginable after we left...I think its all demonic...I follow only one light now and that is the Lord!

Love and Blessings

Angel H.

[angels4u]

Hello Angel H.

Thank you for replying.hmmm orbs I don't know if I can believe in something like this there is no doubt in my mind that this is demonic deception or something.

Thanks girl, may God bless you, Angels

[refugepsa91]

Your welcome.....I used to be intrigued by that kind of thing....not anymore though...I even stopped watching that John Edward show on scifi...ah-being saved is awesome!

Love and Blessings

Angel H.

[The Journey]

Angel,

 Undoubtedly the most powerful angels have the ability to manifest in the physical world.  The most powerful fallen angels are also those most adept at deception.  That is the danger with messing with spirits.  They are so good at deception even the most seasoned believer may be trapped.  They are oh so subtle.  It may be as subtle as they new sense of spiritual pride you now feel that you have power over them.  They are only too willing to give it as they know the effect on believers looking so hard for a validation of their faith.  Years later you feel you are quite the spiritual warrior.  A honed sense of right and wrong...why your faith is so strong you deflect disease and certainly know the Lord's mind more than most believers (especially those that post on this board).  The only problem is you created all this in your mind.  Your deep sense of discernement is your own heart now leading you astray.  You left humility and left the Lord years ago.  This is how it happens.  I sternly warn the Church beware this cancer of the soul.

- Steve

[angels4u]

Hello Steve,

I agree not to mess with spirits which are not of God and I know people can get very decieved by it, actually I believe alot of Christians might be decieved by stuff what they think is of the Lord but is not,anything what takes the place of God is a no-no the reason I asked about those "orbs" is that I never ever heard of it before,believe me I'm not looking for the occult but try to stay away from it, I believe we all get influenced by it by times because its everywhere around us.

I like to stay on the narrow road!!

In Him,Angels4u

[refugepsa91]

Angel,

[Ovedya]

Look up "ball lightning" on the web.

[angels4u]

Thank you God-man this is very interesting.....

Ball Lightning

in microwave ovens

Ever since the invention of the microwave oven in the 1950's,

humans have had a fascination with  "nuking stuff ".  As a

result, we now know of all kinds of interesting effects that can be brought

about by placing non-food items such as CDs, burning toothpicks,

metal items, lightbulbs, cats, etc. in our microwave.  Sometimes,

bizarre things happen and a flaming ball forms in the oven,

surviving several seconds and rising to the top of the oven where

it then dissipates.  Folks have found their own means of trying to

reproduce the "ball lightning"- and now I share my own ideas with you!

This is the "ball lightning" effect in the 700-watt oven in my dorm, captured

via a video camera.   The ball is on the order of an inch in diameter and

glows a fiery orange / violet color.  It survived about four seconds, and was

produced via Procedure 1 below...

First a bit of theory...a microwave oven is a conducting cavity that confines the 2.54 GHz energy produced

by the oven's magnetron.  The magnetron is a really clever type of vacuum tube that converts DC into

microwaves with over 70% efficiency.  It usually resides in the right-hand side of your oven , coupled to

a short length of waveguide that leads to the oven cavity.  A typical oven magnetron develops 700 watts of power.

The waveguide that leads from the "maggie" to the oven can only propagate a single mode of oscillations- the

simplest transverse electric mode.  But the oven itself is much larger than the dimensions of the wavelength of

the microwaves, and many field configurations are possible.  The energy is distributed among these modes.

The fields in a microwave oven are quite high- voltage gradients of 500 V / cm exist in an average oven,

according to a book on microwave heating technology (sorry- I forgot the name!)  So this makes it possible

to generate arcs and discharges with the RF power in the oven.

The reason the "ball lightning" is formed is that hot ionized gas in flames and arcs is a pretty good conductor,

and like a moist hunk of meatloaf, will absorb microwave power and resistive heating will result.  Being hot and

lighter than surrounding gas, the arc or flame will rise and can detatch from its source.  The resulting ball is

kept hot by continuing to absorb microwaves.  When the ball reaches the metal walls of the oven cavity, its heat

is absorbed and it loses its ability to conduct.  Hence the discharge is terminated.

People can do two things to initiate the ball:  they can provide a flame to absorb microwaves, or they can provide an electric arc.  The flame itself is a little difficult, since it needs to be put in the right place in the oven's fields to absorb sufficient power.  So usually the toothpick, matchhead, flaming bread, candle, etc. approach will take some playing around before you can get a ball on a regular basis.  But my devices are designed to put the high fields right where the flame is.  They are quarter-wave resonators that develop a voltage antinode at the free end.  My first design generates an arc from this point, which then develops into a ball.  My second design uses a flame at the end of a quarter-wave element.  Note that, as I said earlier, the wavelength in the oven is different from that in free space, and so my dimensions may be off.  But the devices work well...

This is Design 1.  Cut a disk "B" of aluminum or copper, 2.4 inches in diameter.  Solder or tape a 1.5-inch long piece of metal sheet "A" to its midpoint, cut a sharp point at the free end, and bend it within a few centimeters of the disk edge as shown.  Aluminum foil works, but it's not durable, as you can easily observe after firing the toy.  If you value the nice paint job in your oven cavity, don't set the toy directly on the bottom of the oven, but rather on a glass or other standoff so it can't spark through your paint and blacken it.  The toy works best if it's not rotated (disable your oven turntable) and if your oven doesn't have a "mode stirrer" fan.  If it does, you can disable that also with a rubber band (find out how yourself.)  This device wants a powerful oven, 700 watts or more.

 

Design 2.  This is made from copper pipe and sheet that is silver-soldered together to make a little alcohol lamp.  The dimensions of the surface "B" are the same as the dimensions of "B" on the first device, and "A" is a piece of 3/8" refrigerator tubing about an inch long.  A little ethanol is poured into the lamp through the tube, and a piece of string is inserted to wick up the alcohol.  Light the lamp (please make sure it is not leaking any alcohol!!!) and place in oven.  The flames grow and become balls.

[Ovedya]

Ball lightning is also a natural occurance in the atmosphere.